Ponovo novi bag na Windows 10 u vezi printera

Ma ljudi moji, jel ovo moguće ?

Novi bag se pojavio na Windows 10 operativnim sistemima u vezi nemogućnosti rada mrežnih printera nakon redovnog update-a.

Error 0x0000011b Windows cannot connect to the printer operation failed KB5005565

++

Pre izvesnog vremena su bili oštećeni Kyocera printeri, a današnji bug deluje na sve tipove štampača u mreži, na primer HP Laser Jet 1102, Canon LBP2900, etc.

To su sve štampači koje inače imaju skoro sve lokalne samouprave, bolnice, domovi zdravlja, pa vi vidite na čemu smo.

Posle deinstalacije spornog update-a obavezno onemogućite Windows Update, možda bi bilo dobro uraditi i Windows 10 Debloater proceduru (https://github.com/Sycnex/Windows10Debloater).

Za svaki slučaj uradite i debloat ako smete !

Windows 10 je legalan i plaćen, a problemi se samo redjaju !

Ako imate Windows 7 držite se njega, jer ove nebuloze ne utiču na njega.

Ovaj problem se pojavio 17.09.2021 pa sve do 21.09.2021, u zavisnosti kada Vam se Windows 10 apdejtovao.

Ako imate samo jedan štampač koji nije šerovan u mreži nećete osetiti ove probleme, ali ako ste neka ustanova, firma ili slično, jao si ga Vama, admini ima da rade puno radno vreme na deinstalaciji ovih Microsoft gluposti sa apdejtima.

Eto još jednog razloga da predjete na Linux, pametnom čoveku dosta, ali ima prilično Microsoft lobista, tako da je crna kapa.

https://sigurnostnamrezi.wordpress.com/category/racunari/page/2/

Alternativa za Windows 10 i Windows 11:

https://peppermintos.com/

https://nixos.org/

https://getsol.us/download/

https://www.nutyx.org/en/

https://endeavouros.com/

Linux King in 2038 ?

 

https://kotlinlang.org/docs/native-overview.html#interoperability

https://helperbyte.com/questions/122812/how-to-parse-html-using-httpclient

https://www.gadgetronicx.com/wired-spy-bug-circuit/

https://www.easyuefi.com/wintousb/

https://lifehacker.com/how-to-run-a-portable-version-of-windows-from-a-usb-dri-1565509124

Very good FM transmitter

MICRO EDITOR - the new editor

https://micro-editor.github.io/

 https://www.electroschematics.com/88-108-mhz-fm-transmitter-bf982-bf199-bfr90/

The most important part of this 88-108 transmitter is the Colpitts oscillator. C3,C4,C5,C6,CD1-CD2 ans L1 determine the transmission frequency. The RF Oscillator circuit has the BF982 MosFet transistor wich is the active part. The others 2 transistors separate the VCO from antenna.

The first stage BF199 amplifies the weak signal from the vco and functions in constant load. The second stage BFR90 amplifies the rf signal to load the antenna wich will radiate the radio frequency power.

Antenna can be one wire, 70 cm long. L1 coil has 1mm thick copper wire, 3.5 turns, 5 mm diameter and 1mm space between turns.

You can use BF199 instead of BFR90 and MV104 instead of the 2 varicape diodes.

The ultimate book Pro C# 7 with .NET and .NET Core 8 * edition * Andrew Troelsen & Philip Japikse * Apress * 29 MB * 1410 pages * PDF format, please contact me if you need this an excellent book.

https://www.electroschematics.com/radio-transmitter-circuit/

https://www.catalog.update.microsoft.com/Search.aspx?q=KB4511872

cumulative update for ie11

Insanely good Linux distributions:

https://www.supergrubdisk.org/category/download/rescatuxdownloads/rescatux-stable/

https://nxos.org/

https://www.digi77.com/linux-kodachi/

https://getsol.us/download/

https://fydeos.io/

https://www.madfingergames.com/shadowgun/legends

 Индија делила комбинацију лека ивермектина, цинка и доксициклина --lek protiv korone.

Super FM trans

 Este é um transmissor de FM pequeno mas bem potente que tem três estágios de RF incorporando um pré-amplificador de áudio para melhor modulação. Tem uma potência de 4 Watts e funciona com 12-18 VDC, tornando-o portátil. É o projeto ideal para o novato que deseja iniciar-se no fascinante mundo dos transmissores de FM e quer um circuito básico e bom para fazer experiências.

Lista de Componentes

R1 = 220K
R2 = 4,7K
R3 = R4 = 10K
R5 = 82 Ohm
R = 150 Ohm 1/2W X2 *
VR1 = 22K log trimpot

C1, C2 = 4,7 uF 25V eletrolítico
C3, C13 = 4,7nF cerâmico
C4, C14 = 1nF cerâmico
C5, C6 = 470pF cerâmico
C7 = 11pF cerâmico
C8 = 3-10pF trimmer
C9, C12 = 7-35pF trimmer
C10, C11 = 10-60pF trimmer
C15 = 4-20pF trimmer
C16 = 22nF cerâmico *

L1 = 4 voltas - 5,5mm diâmetro
L2 = 6 voltas - 5,5mm diâmetro
L3 = 3 voltas - 5,5mm diâmetro
L4 = impressa na placa
L5 = 5 voltas -7,5mm diâmetro

RFC1, RFC2 e RFC3 = VK200 RFC tsok

TR1 = TR2 = 2N2219 NPN
TR3 = 2N3553 NPN
TR4 = BC547/BC548 NPN
D1 = 1N4148 diodo *
MIC = microfone de cristal

Nota: Os componentes marcados com * são usados para o ajuste do transmissor no caso de você não ter um medidor de R.O.E. (onda estacionária).

FM World

 http://www.zpag.net/Electroniques/English/Radio/fm_3_transistor_circuits.html

https://www.eleccircuit.com/two-transistors-fm-wireless-microphone-circuit/

http://www.circuitdiagram.org/three-stage-fm-transmitter.html

https://www.electronicsforu.com/electronics-projects/simple-fm-transmitter

https://www.homemade-circuits.com/make-this-stereo-fm-transmitter-using/

http://www.circuitdiagram.org/high_power_fm_transmitter.html

http://meutransmissorfm.blogspot.com/2016/05/transmissor-de-fm-com-2n3553-4-watts-de.html?m=1

https://github.com/sandboxie-plus/Sandboxie

https://circuitdiagram.net/4-stage-fm-transmitter.html

This is the FM transmitter circuit which apply 4 radio frequency stages, that are a VHF oscillator designed around transistor BF494 (T1), a preamplifier designed around transistor BF200 (T2), a driver designed around transistor 2N2219 (T3) and also a power amplifier designed around transistor 2N3866 (T4). A condenser microphone is wired at the input of the oscillator.

The Operational of this FM transmitter circuit is very simple. At the time you speak close to the microphone, frequency-modulated signals are produced at the collector of oscillator transistor T1. The FM signals are amplified by the VHF preamplifier and also the pre-driver stage. You’ll be able to also use transistor 2N5109 as a placement of 2N2219.

The preamplifier works as a tuned class-A RF amplifier while the driver works as a class-C amplifier. Signals are finally fed towards the class-C RF power amplifier, which delivers RF power to a 50-ohm horizontal dipole or ground plane antenna.

Regulator IC 78C09 gives you stable 9V supply to the oscillator, so variation in the supply voltage is not going to have an impact on the frequency produced. You are able to also use a 12V battery to power the circuit.

Use a heat-sink with transistor 2N3866 for heat dissipation. Alter the trimmer VC1 connected across L1 to produce frequency within 88-108 MHz with care. Also alter trimmers VC2 through VC7 to obtain maximum output at maximum assortment.

Assemble the circuit on a generalpurpose PCB. Set up the antenna correctly for optimum range. Coils L1 through L5 are built with 20 SWG copper-enamelled wire wound over air-cores that have 8mm diameter. They will have 4, 6, 6, 5 and 7 turns of wire, respectively.

This 4 stage FM transmitter tested by Electronics For You mag and should be work. You can download this circuit in PDF version from the following link:

Read more https://circuitdiagram.net/4-stage-fm-transmitter.html

Excel tips

 https://pakaccountants.com/excel-dsum-function-explained-with-examples/

Commodore 64 game for free in 2021 = credit:

http://impossible-mission.krissz.hu/

FM tips:

http://electronics-diy.com/6w-fm-transmitter-88-108-mhz.php

http://electronics-diy.com/electronic_schematic.php?id=1030

https://circuits-diy.com/3v-two-transistor-fm-transmitter-circuit/

https://xtronic.org/circuit/audio/circuit-of-stereo-fm-transmitter-hi-fi-with-ic-ba1404-power-stage/

https://www.instructables.com/Arduino-TEA5767-FM-Radio-Receiver/

http://electronics-diy.com/ba1404-fm-stereo-transmitter-with-amplifier.php

https://sci-toys.com/scitoys/scitoys/radio/radio.html

https://www.usefulcomponents.com/main_contents/projects/choccy_block_crystal_radio/choccy_block_crystal_radio.html

http://electronics-diy.com/electronic_schematic.php?id=945

http://electronics-diy.com/BA1404_Stereo_FM_Transmitter.php

https://www.instructables.com/Make-a-RF-Transmitter-and-Receiver-With-HT12E-HT12/

http://www.afiata.com/mini-fm-radio-transmitter-circuit/

CanoScan LIDE 25 on Ubuntu

 In fiesty fawn support for CanoScan LIDE 25 is broken. The scanner gets identified properly and goes thru the motions of scanning and has an progress indicator on the xsane window but the scanned image results in a blank window. This is a documented bug and might be fixed with the next release.

a work around to this is to use the command line version of sane, here is how to do it

1. plug the scanner into the USB port and run the following command “sane-find-scanner “
you should see the follwing lines as pat of the output

found USB scanner (vendor=0x04a9 [Canon], product=0x2220 [CanoScan], chip=LM9832/3) at libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend’s manpage.

2. type in “scanimage -L” at the terminal. you should see the follwing lines as part of the output

device `plustek:libusb:001:002′ is a Canon LiDE25 USB flatbed scanner
3. you can now use the following command to get a scan

“scanimage –format=tiff –mode=Gray –depth=16 –resolution=100dpi -l 0 -t 0 -x 215 -y 215 >> test”

you can set different options for the mode, depth and resolution to get better quality scans. to see the various options available try the“scanimage –help” command.

Update : I found a better method of fixing the scanner issue on this site

While the solution provided fixes any scanner broken during an update from previous versions to feisty the solution also works for fresh install of feisty as well.

here is how you fix the scanner in a nutshell

1. install scanbuttond using apt
2. list usb devices : lsusb
3. run scanbuttond : scanbuttond -r 1000000
3. list available imaging devices : scanimage -L
4. Test basic scanner operation : scanimage -T -d (Append output of scanimage -L here)

for e.g for my scanner the command looks like this “scanimage -T -d plustek:libusb:001:002”

5. Test gui scanner operation : xsane

The above link gives you more detailed instructions, you should refer to that site if you didn’t understand the 5 steps above.

https://www.gnostice.com/nl_article.asp?id=306&t=How_to_convert_scanned_images_to_searchable_PDF_using_OCR_in_NET

Original:

https://harishbsrinivas.wordpress.com/2007/05/23/using-a-canoscan-lide-25-with-sane-and-ubuntu/

https://github.com/cyanfish/naps2/releases

https://askubuntu.com/questions/634030/canon-canoscan-lide-25-ubuntu-14-04-lts-failed-to-scan

http://linux-hardware.org/?id=usb:04a9-2220

https://www.rosalinux.ru/

https://www.youtube.com/watch?v=CB4Sl9Xwb_I

++

http://www.softwareok.com/?Download=WinScan2PDF

http://www.koma-code.de/

Koma-Mail portable (3.83)
Koma-Mail with installer (3.83)
CPU-Control
Scan2PDF
Scan2PDF (Portable)
Yiola (1.2)
Yiola
USB-ToolBox2

LAZARUS-IDE PDF SCANN

https://forum.lazarus.freepascal.org/index.php?topic=12548.0

Solus must try Linux

 https://getsol.us/home/

srpski svet

https://www.phplift.net/12-reasons-to-choose-php-for-developing-website/

WIDE OPEN SERBIAN WORLD

https://www.instructables.com/Make-Any-Vintage-Keyboard-Work-With-a-Modern-PC/

https://www.te1.com.br/2013/03/circuito-transmissor-fm-mp3-mp4-computador-celular-potencia-transistor-2n2218-741/#axzz2tV8Vzu1X

https://www.instructables.com/The-Ultimate-FM-Transmitter/

https://www.te1.com.br/2008/12/transmissor-de-fm-potente-com-2n2218/

https://www.te1.com.br/2014/05/super-transmissor-de-fm/

Say something to me and the whole world

SERBIAN WORLD

My new website, written 10 minutes from scratch!

http://rad.eu5.org

https://twitter.com/serbianworld?lang=en

Rapid-application development (RAD), also called rapid-application building (RAB), is both a general term for adaptive software development approaches, and the name for James Martin's method of rapid development. In general, RAD approaches to software development put less emphasis on planning and more emphasis on an adaptive process. Prototypes are often used in addition to or sometimes even instead of design specifications.

RAD is especially well suited for (although not limited to) developing software that is driven by user interface requirements. Graphical user interface builders are often called rapid application development tools. Other approaches to rapid development include the adaptive, agile, spiral, and unified models.

More tips:

https://www.howtogeek.com/747842/how-to-use-a-whiteboard-in-a-microsoft-teams-meeting/

Insert more jpgs to LazReport:

https://forum.lazarus.freepascal.org/index.php?topic=5752.0

https://forum.lazarus.freepascal.org/index.php?topic=31963.0

https://forum.lazarus.freepascal.org/index.php?topic=18361.0

https://www.developpez.net/forums/d1403742/autres-langages/pascal/lazarus/lazreport-outil-d-insertion-d-image/

1. procedure TForm1.frReport1EnterRect(Memo: TStringList; View: TfrView);
2. var
3.   FileName: String;
4. begin
5.   if (View is TfrPictureView) then
6.   begin
7.     if (View as TfrPictureView).Name = 'imMyImage' then //change imMyImage
8.     begin
9.       FileName := SQLQuery1.FieldByName('PATH_OF_IMAGE').AsString); //change SQLQuery1
10.       (View as TfrPictureView).Visible := FileExists(FileName);
11.       if (View as TfrPictureView).Visible then
12.         (View as TfrPictureView).Picture.LoadFromFile(FileName);
13.     end;
14.   end;
15. end;

for i := 1 to 36 do begin

   sgEL.Row := i;

   frReport1.LoadFromFile(gsReportPath+myReport.lrf');

   frReport1.PrepareReport;  {from Rows[i]}

   frCompositeReport1.Reports.add(frReport1);

end;

frCompositeReport1.ShowReport;

//---

var

  r: TfrReport;

for i := 1 to 36 do begin

   sgEL.Row := i;

   r:=TfrReport.create(self);

   r.loadFromFile(gsReportPath+'myReport.lrf'); // here myReport.lrf must be the report corresponding to Row "i"

   frCompositeReport1.Reports.add(r);

end;

frCompositeReport1.ShowReport;

//---

type

TForm1 = class(TForm)     

 Filas: TfrUserDataset;   

 frCompositeReport1: TfrCompositeReport;       

 [...]

 procedure TheReportEnterRect(Memo: TStringList; View: TfrView);

 procedure TheReportGetValue(const ParName: String; var ParValue: Variant);

 [...]

end;

procedure TForm1.Button12Click(Sender: TObject);

var

i : integer;

begin

  with frCompositeReport1 do begin

    DoublePass:= True;

    Reports.Clear;

  end;

  for i := 1 to 36 do begin

   sgEL.Row := i;

   TheReport :=TfrReport.Create(self);

   TheRepor.OnEnterRect:= @TheReportEnterRect;

   TheReport.OnGetValue:= @TheReportGetValue;

   TheReport.Dataset := Filas;

   TheReport.loadFromFile(gsReportPath+'myReport.lrf');

   //TheReport.PrepareReport;

   //TheReport.ShowReport; {The 36 pages are OK}

   frCompositeReport1.Reports.add(TheReport);

end;

frCompositeReport1.ShowReport;

//---

var  TheReport : array [1..100] of TfrReport;

begin

for i := 1 to 36 do begin

   sgEL.Row := i;

   TheReport[i]:=TfrReport.Create(self);

   TheReport[i].OnEnterRect:= @TheReportEnterRect;

   TheReport[i].OnGetValue:= @TheReportGetValue;

   TheReport[i].Dataset := Filas;

   TheReport[i].loadFromFile(gsReportPath+'myReport.lrf');

 //  TheReport[i].PrepareReport;

 //  TheReport[i].ShowReport;         {It's OK}

   frCompositeReport1.Reports.add(TheReport[i]);

   TheReport[i].Free;

end;

frCompositeReport1.ShowReport;

Even more stuff to go:

https://sourceforge.net/projects/jpegview/files/jpegview/

https://ameliorated.info/

https://wiki.ameliorated.info/doku.php?id=documentation_20H2

https://vip-cxema.org/index.php/home/raznoe/63-impulsnyj-payalnik-svoimi-rukami

https://www.patreon.com/

https://www.instructables.com/How-to-Make-a-Negative-Ion-air-ionizer/

https://www.instructables.com/eWaste-60-3DPrinter/

Rotate jpg

 http://delphi-kb.blogspot.com/2011/01/how-to-mirror-and-rotate-bitmaps.html

https://www.cnblogs.com/shangdawei/archive/2013/05/09/3070128.html

http://www.davdata.nl/math/rotation.html

http://codingdelphi.blogspot.com/2009/11/rotate-image-scanline.html

https://wiki.lazarus.freepascal.org/Developing_with_Graphics

https://www.codeproject.com/Questions/345779/How-we-rotate-image-45-degree-in-delphi

https://xkobyx.blogspot.com/2018/01/export-image-to-pdf-with-delphi.html

https://sourceforge.net/projects/lazarus-ccr/files/PowerPDF/

https://www.mariovaldez.net/software/oscpmwin/showcode.php?srcfile=oscpmwin_v0.4.1.692/fr_e_tnpdf.pas

https://fossies.org/linux/lazarus/components/lazreport/source/addons/pdfexport/lr_e_pdf.pas

++